Custom Mod: Air Intake Cover

While I should have taken a few more photos during the making of it, I forgot. Meh! :)

You’ll need:
Cardboard.
A sheet of aluminum.
Scissors.
Spray Paint.
Screws.
Drill.

Use the cardboard to draft cut and fit where the sheets will go.

Trace the cardboard cut-out onto your sheet of aluminum; allow some space on either sheet at the edge where they meet.

Fold the extra space a 90 degree angle.

Align the two sheets and drill holes for the screws & fender bolts

Test fit them.

This is my test fitment:

20111219-070359.jpg

Spray the sheets.

My sheets painted:

20111219-070647.jpg

Fit them.

And voila!

20111219-070750.jpg

Leave a Reply